There are a number of steps involved in replacing a kitchen faucet. The first is to locate the faucet and remove the screws that secure it to the sink. You will need to disconnect the water supply tubes and stop valves. A pair of channel pliers and a basin wrench are essential tools. You should also remove the nuts that hold the faucet to the sink. A wire brush is a great tool for scraping off any rust that might be present. You should also make use of an acid-based scouring cleaner and a new scouring pad to remove any residue.

Test the faucet

Once you have removed the screws, the next step is to test the faucet. You may not be able to turn the handle fully to get hot water, but you will still need to check the connections to be sure that everything is tight. If you don't feel any leaks, you can buy a new faucet. Make sure to select one with a pull-out nozzle to make cleaning easy.

Measure the sink hardware

If you are unsure of your plumbing skills, consider hiring a plumber. A plumber will have the proper tools and experience to replace a white kitchen tap. In addition, you should measure the sink hardware to ensure you are getting the correct hole size for the replacement tap. Once you have determined the size of the holes, you can begin the process of replacing the tap. Make sure to note the number of holes that need to be replaced and the space that needs to be left between the holes. This space is known as the OC (on centre) spacing.

Contact a professional plumber

You may also need to call a plumber if you suspect the faucet is not working. A faulty faucet can cut off the water supply and cause you to stop using the faucet. If the problem persists, you should contact a professional plumber in Melbourne to get the problem fixed as soon as possible.

If the handle of your faucet is stripped, you may have a difficult time removing it yourself. If this is the case, you should seek help from a plumber so that he or she can examine the stem and make sure it is not stripped. A stem uses a washer to disperse pressure, and if it is not properly lubricated, the washer may crack and the handle won't shut off the water.