Like any other device in your kitchen, the pressure cooker may encounter problems. With the pressure cooker which usually have trouble with the timer, the lid is not sealed or the surrounding issues. These problems are not difficult to solve, but it will affect the cooking time, food quality and sometimes damage to your cooker. In this post, we will refer you to the universal weir message displayed when there is a problem with your pressure cooker.
Error Codes usually display on a pressure cooker.
The pressure cooker uses an error code to indicate specific problems. If a system is on, you should search for what it means. Even it is the highest rated-pressure cooker or not. It uses the same sign for each error.
Decipher the common error codes and how to solve them immediately
Here is a list that often appears and ways to deal with them that you can refer to:
Burn – This is an undesired signal during the cooking process. The pressure cooker issues this message when the sensor detects that the pot is overheating. Typically, this means there is no liquid in the pan, or the liquid has not reached all the bottom corners of the container. Fortunately, this is very easy to fix. You need to let your pot cool down if you have been stirring it in high pressure for a relatively long time. If you are dealing with more elaborate dishes, layer the starches and sauces on top of other ingredients to make a barrier between them and the bottom heater. On the other hand, you can use the cooking rack to elevate meats. Moreover, if you have sautéed a liquid sauce or similar ingredients in the pot, you should make sure no bits are stuck before you move on to the next tasks.
Ovht – It considered as the signal “Burn”. It is a wellbeing safety measure since your pot is nearly overheating. This notification detects any further heating.
C7 – C7 is another blunder that might be applicable to the Instant Pot EVO modules. C7 shows that the warming component has fizzled. That means the liquid is not enough, or the quick-release switch set to vent pipe position. In the event that you get the blunder in the wake of checking the vent discharge valve cautiously and suspensions to guarantee you arrived at the base measure of fluid required for pressure. You should contact Customer Support for additional help. Do not hesitate to contact them because a good pressure cooker always comes with a good policy.
C6 – The C6 error displays when there is a faulty pressure sensor. In this case, you have to unplug it immediately to make it safe.
LID – The lid is not precisely seated.
noPR – This means that your cooking pot can not reach pressure. It can cause by the clogged gasket, not enough liquid or the gasket is worn thin. You should check those factors to adjust in time.
C5 – Inner pot is not properly seated .
C2 – When C2 error displays, it means there is a faulty pressure sensor and has short-circuited. Like the C6 error, unplug it right away.
C1 – If your pressure cooker displays a C1 mistake, unplug it immediately. There is a flawed pressure sensor. This error is like C2 and C6.
In conclusion, a good pressure cooker always encourages you to carefully read the instructions for use and adheres to safety measures when using the pressure cooker. Therefore, you should learn thoroughly and have a timely solution to the error codes. By doing that, you will not only ensure safety but also help your pot get a longer lifetime. Hope you will get a better understanding of these error codes and apply it precisely if you face with them to the next time.
If you have any concern, feel free to ask us.
Source: https://www.tai-ji.net/members/profile/3062294/rafaelmoya.htm
You Might Also Enjoy:
➨ What is a good pressure cooker
➨ Best pressure cooker on the market - The top pressure cooker reviews
